P0008 is a fault code which indicates some issue with the Engine Control Module (ECM). It detects a variation in the mechanical timing between the crankshaft and bank 1 camshaft.
It is very important to fix the fault code P0008.
A professional scan tool should be connected to check if the code exists or not
Inspect if there are some other fault codes which may be related to this issue and try to clear the error codes to check which fault codes actually return
The scan tool data from the ECM related to the code should be analysed and you must try to road test the car while analysing the scan tool data from the ECM. Carefully check if the P0008 code returns or the symptoms exist
The need to remove the timing/ front engine cover may be required if the signals and scan tool values are within specification
You must verify the timing marks on the crank and camshaft sprockets align
You can find some signs of wear, so that’s why you must inspect the condition of the timing chain/belt and guides
The component which would be found damaged during the testing should be replaced
Easy Diagnosis Of Engine Error OBD Code P0008
An advanced scan tool is used to properly diagnose P0008 fault code which is capable of factory sensor readings as well as codes to start. A technician which is well qualified would be able to read the data from the scan tool and would tell that exactly when and where the issue actually occurred or if the problem is still occurring. They can always clear the code from the ECM and take a test drive of the vehicle.
If you find out that the fault is irregular, then it would be a good idea to visually inspect the wiring as it can produce more results. Or else the vehicle will have to be driven until the problem becomes more tenacious. Now if you find out that the fault has returned back immediately, then your issue would be narrowed down with the help of scan tool as well as information from the professional resources. Or else you may require a digital voltage scope which would help in monitoring the sensor signals.
It is important to read the values of the ECM and that’s why an advanced scan tool would be required
A digital voltage scope with attachments
To access the sensors and timing components, you may need some basic hand tools
