The P0007 code can also arise due to some issues in Fuel Shutoff Valve.
ECM - Common cause behind this P0007 error code can be some fault in engine control module.
The check engine light may be produced due to which P0007 code would be depicted.
The engine may keep on running even after the key has been turned off
Due to lack of fuel pressure, car engine might not start
Possible stalling while idling or driving
How To Correct P0007 Fuel Shutoff Valve "A" Control Circuit High
Research from professional sources should be performed for testing and values which are based upon the code
There can be some other fault codes as well which may be related to the issue
Try clearing the fault codes to see which fault codes actually return
It is very important to analyse scan tool data from the ECM
Road test the vehicle while analysing the scan tool data from the ECM with other tools attached
You can always check if the P0007 code returns or the symptoms exist
The items listed above like wiring, voltages, etc. should be visually inspect
Use some special tools listed above to diagnose the problem if it keeps on repeating
Carefully analyse the signals and wiring from the sensor to determine where the problem actually exists.
There is no need to get strained if your OBD Code is still flashing up as we are here at your service.
A technician which is well qualified would be easily able to read the data from the scan tool and then would be able to determine that where the problem has exactly occurred and if it is still occurring or not. After that they can clear the code from the ECM and then later test driving of the vehicle can be done to check if the fault code returns back or is still constant.
An advanced scan tool which is capable of reading the ECM data values
A digital voltage meter with attachments
Some general hand tools to access the sensor and wiring
A razor blade to cover the wiring harness
