P0005 Fuel Shutoff Valve "A" Control Circuit Open

The P0005 code can also arise due to some issues in electronic control module.

Powertrain Control Module- P0005 code does not really end up spoiling your engine control module, but it might also accompany few powertrain control module issues.

Check Engine Light may start illuminating

Car engine may stall

The engine might not start properly

Decrease in the amount of engine performance

Rise in fuel consumption

How To Correct P0005 Fuel Shutoff Valve "A" Control Circuit/Open

It is very important to fix the fault code P0005. 

The OBD Code P0005 is caused due to lack of fuel pressure and it not a reaction to it.

You must make sure to test the wiring as well as connectors at the fuel shutoff valve so that the voltage and ground readings are close to battery voltage

There can be some loose or damaged connectors or wiring, so make sure to carefully inspect the electrical connectors

Always being your diagnosis by first visually inspecting all the wirings as well as connectors.

You may also require some circuitry and connectors to replace the shorted or burned wiring.

Check the wiring, connectors and other components and if they are working in the normal condition, then all you have to do is to connect the scanner to the diagnostic connector and carefully record all the stored fault codes.